YAMAHA GENERATOR 11000 WATTS DIESEL

/// YAMAHA GENERATOR 11000 WATTS DIESEL!

The largest member of our diesel family of generators is the EDL11000SDE. Despite its high output, its compact design, low overall height and reduced noise levels make it a versatile performer. If lower running costs and easier maintenance access are important to your business, farm, job site or off grid application, then check out extensive range of features the EDL11000SDE offers.

Automatic engine shut-down for low oil pressure and excessive coolant temperature, dedicated terminal for ATS switches, double circuit breakers and a convenient maintenance hatch for easy access to key components, the EDL11000SDE with its lower running costs could be the perfect solution for your serious power needs.

/// FEATURES

• Powered by D722 vertical type diesel engine; 719cc, liquid-cooled (rad with cooling fan), three cylinder, 4-stroke diesel engine with electronic ignition. Max power is 12.2 kW or 16.4 hp.
• Compact and lightweight design... smallest and lightest in its class
• Key operated electric starting
• Dual 120 & 240 volt output
• Rated AC output for continuous use is 10 kVA (10,000 watts) / 83.3 amps @ 120 volts & 41.7 amps @ 240 volts
• Generator unit is directly connected to the engine eliminating the need for reduction gears.
• External ground terminal
• Maintenance-free brushless alternator offers superior reliability and reduced maintenance.
• Neutral bonded to frame
• Skewed rotor keeps waveform distortion to a minimum
• Run time at rated load is 7 hours
• Dual Ground Fault Interrupter Circuit receptacles for added safety
• Cooling fan is driven off the crankshaft for reduced wind noise
• High capacity radiator
• Liquid-cooling maintains consistent performance and reduces mechanical engine noise.
• Large capacity muffler helps to reduce exhaust noise.
• 200 hour oil change cycle
• Convenient user-friendly control panel
• Large opening maintenance hatch for easy access to oil filter, air filter, fuel filter, battery etc.
• Dedicated terminals for easy connection to Automatic Transfer Switches (ATS)
• Main breaker system protects against large amounts of excess current
• Separate sub-circuit breakers for each GFIC receptacle protects against small amounts of excess current
• Warning lights for low battery, low oil pressure and coolant temperature
• Glow plug timer indicator light
• Automatic engine shutdown system in the event of low oil pressure or engine over heating
• Large size, washable, "no tools required" dual stage air filter
• Convenient exterior drain plugs for oil and coolant
• 28 litre fuel tank means extended run times
• Large fuel filler hole and fuel gauge
• Hour meter
• Heavy duty lifting hook and fork lift slots
• Low emission EPA Tier 2 compliant
• CSA approved (Canadian Standards Association)
• 3-year warranty for "residential / home" use or "commercial use."

/// Because with a Generator, size matters
When purchasing a generator, it’s important that you select one that’s capable of meeting your energy requirements. You must match the generator’s rated output to
the maximum anticipated power to be used. This section will assist you in estimating your power requirements.

/// Did you know?

Generator’s Maximum AC Output

The maximum output of a Yamaha generator in wattage is represented by the model name of the generator. For example, our EF1000iS outputs a maximum of 1,000
watts. The generator can operate at its maximum output for approximately 20 to 30 minutes.

Generator’s Rated AC Output

The rated, or running, output of a generator is the amount of current it can supply during continuous long-term operation. The rated output of a Yamaha generator is approximately 10% less than its maximum output. For example, our EF1000iS has a rated output of 900 watts.

Generator’s Surge Output

The starting requirements of devices utilizing electric motors, for example an air compressor, a sump pump, etc., may be significantly higher than the actual wattage required during continuous operation. This must be considered when estimating your power needs.

Most small universal motors such as drills, small saws, blenders, etc., require some additional current during start-up. In most cases, Yamaha generators will allow for a shortperiod of  “over generation” power (less than 3 seconds) to help with the initial start-up.

/// Determining Your Energy Needs
If you are unaware of the power requirements of the devices you will be using with your Yamaha Generator, refer to the Application Chart on the opposite page. This guide will help you find the approximate amount of power you may need. For accurate power requirements, also check the appliances with a load tester or contact
the appliance manufacturer.

/// Take it step-by-step
Follow these steps when determining your energy needs:

1. Identify the wattage requirements for what you want to power. The power requirement for the tool or appliance can be found on its identification plate or in its Owner’s Manual. If the power requirement is given in amps, multiply the amps by volts to derive the required watts. Amps x Volts = Watts

2. A dd up the required watts of all the tools and appliances you expect to operate simultaneously. Manufacturer’s devices may use more or less than the
listed wattage. Add a 10% correction factor to your total to help overcome this uncertainty.

3. T he total watts derived in step 2 is the size of Yamaha generator you need. For example, if you only intend to use a coffeemaker, a toaster and a 100-watt light bulb simultaneously, as shown in Sample Chart beside, the combined maximum power requirement would be 2,050 watts plus 10%. A generator that can produce a continuous rated output of 2,255 watts would be the EF2600 or EF2800i.